Delrin Indexing Arm/Trigger-Sear for Magpie

Laser cut delrin springy bits for the MHP Magpie! This is a test run to make sure delrin will hold up to repeated cycles, so if you get a set of these please let me know how they work. I strongly suggest using a flathead (countersunk) screw to provide clearance against the side plates, otherwise some hand-fitting of parts may be required.

NOTE: I am no longer producing these. The remaining stock has defects of some kind, generally areas that did not laser thru all the way. You will need to trim or drill out the holes and any other areas that did not fully separate from the sheet - I will include a few sets with each order so that you have spares to test with.